Atten AT6011 Manual do Utilizador descarregar pdf (Página 4)

Technical Specifications

High definition color TFT LCD

High definition color 640x480 TFT LCD enables high precision

measurement and natural data display.

Simple and easy to use KEY

Keys are allocated for user's conveniences so that users

can be easily familiar with them. And they provide

various functions.

USB Interface

Can store measured data into the USB Memory through its

built-in USB Host that supports USB 1.1 and 2.0(GIF Format)

Can convert measured data to MS Excel as it also

supports the CSV file format.

Supports nearly all types of printers such as Centronics

printer and USB Interface printer

Firmware can be upgraded through USB

Large Internal Memory Space

Waveform : stores maximum 900 waveforms

State : stores maximum 3,000 states Easily stores/calls

waveforms and states of the equipment based on various

types of application and usage

CDMA Measurement

Channel Power(CHP) Measurement

The PSA-6000 model provides power measurement

functions for mobile communication and simple menus.

Measured values are automatically displayed at the bottem

of trace.

OBW Measurement

Measures the Occupied Bandwidth(OBW) of modulation

signal in the unit of %.

ACP Measurement

Measures the Influence of transmitted power on the

Adjacent Channel, or the ratio of power to the Adjacent

Channel throughout the mobile communication system

using multi-channel.

Frequency

Amplitude

Temperature Stability : 0.5 ppm

Aging : 0.5 ppm / Year

Connector : BNC female

Input Level : -5 dBm to +15 dBm

Output Level : 10 MHz, +8 dBm nominal

Standard Frequency(10MHZ, REF.)

Input

RF Input Connector : N-type Female, 50 ohm nominal

VSWR : 150 kHz to 3.0 GHz,

VSWR <1.5 : 1 (with 0 dBm Reference Level)

Maximum input level : 0 Vdc, +20 dBm

Screen Display

Type : 6.4" color TFT LCD

Display Resolution : 640(H) x 480(V) active display area

Marker Modes : Peak search, Delta marker, Marker to

Center, Marker to Reference (8 markers maximum)

Storage

Trace Storage : maximum 900 waveforms

Setup Storage : maximum 3,000 states

Rate: 100 ms to 1000 sec,40ms to 1000sec(zero span)

Accuracy : 20%

Trigger Source : External(rear), Video, Free Run, Line

Trigger Modes : continuous, single

Trigger Level : TTL level

Range : 9kHz to 3.0GHz(6.0GHz)

Resolution: Minimum 1Hz

Span Range: 100 Hz/div to 300 MHz/div Selection of 1, 2, 5

steps(automatic),ZERO Span, FULL Span

(9KHz to 3.0GHz)

Frequency Selection: Start, Stop, Center, Span setup

Span Accuracy: 3% of the Indicated Span Width

Readout Accuracy: (Indicated frequency Reference

frequency accuracy Span Span

accuracy 50% of RBW)

Phase Noise : 100dBc/Hz (@ 10kHz offset)

Sweep

Range : +20 dBm ~ -105 dBm,

+20 dBm ~ -130 dBm(Pre Amp ON)

Average Noise Level (1kHz RBW, 10Hz VBW) :

105 dBm150 kHz ~ 2.7 GHz

127 dBm(Pre Amp On) 20 MHz ~ 2.7 GHz

100 dBm, -123 dBm(Pre Amp On) 2.7 GHz ~ 3 GHz

130dBm(Pre Amp On) ; Typically

Amplitude Unit : dBm, dBmV, dB V, V, mV, V, W, mW, uW

Display Scale linearity:

1.5 dB/70 dB (10dB/div), 1.5dB/40dB (5dB/div)

0.5 dB/8 dB (1dB/div), 0.5dB/16dB (2dB/div)

Frequency Response (0 dB attenuation) :

3.5 ~ 1.5 dB (100kHz ~ 10MHz)

1.5 dB (10MHz ~ 3GHz)

Reference Level

Range : -90 dBm to +20 dBm

Resolution : 0.1 dB steps

Accuracy : 1.5 dB

Second Harmonic Distortion : 60 dBc, -40 dBm input

Intermodulation Distortion : 70 dBc, -40 dBm input

Residual Spurious : 85 dBm (Input terminated,

0 dB attenuation)

Other Input Spurious : 60 dBc, -30 dBm input

Resolution Bandwidth

Selections : 1kHz, 3kHz, 10kHz, 30kHz, 100kHz, 300kHz,

1MHz, 3MHz, 9kHz, 120kHz

Accuracy : 20%

System size : 350(W) X 195(H) X 370(D)mm

System weight : 10kg

Input Voltage : 100~240 VAC at 50/60Hz

Operating Temperature : 0 to 40

storage temperature: -20 to 70

RF emissions : EN 55011, FCC PART15 Section 15.101

RF Immunity : EN 61326

General Specifications

Interface

RS-232C

Printer

Driver : PCL Command, HP, EPSON,

SAMSUNG,CANON Laser-Jet, Desk-Jet.

Connector : for standard 25 pin female D-Sub

parallel printer, supports USB

USB HostPrinter Driver :

PCL Command, HP, EPSON,SAMSUNG CANON

Laser-Jet, Desk-Jet

Power Cord

Operating Manual

Antenna

SMA cable

BNC cable

Accessories

TRACKING GENERATOR

CDMA(CDMA2000, WCDMA) SIGNAL GENERATOR

GPIB Interface(IEEE 488 Bus)

ETHERNET Interface , for Internet Remote Control

SOFT CARRYING CASE

General KIT SET

RETURN LOSS BRIDGE KIT SET

Options

Selectivity : 60 dB / 3 dB ratio < 15 : 1

60 dB / 6 dB ratio < 12 : 1 (9 kHz, 120 kHz)

Switching Error : 1.0 dB (1kHz Reference RBW)

Video Bandwidth : 10 Hz to 3 MHz in 1-3-10 steps

USB Storage Device : Supports 1.1 and 2.0, for storing

image file, supports GIF format

Ethernet(Option) : 10-Base-T Ethernet,

Supports internet remote control

GPIB Interface(Option) : IEEE488 bus

0706

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários

Atten AT6011 Manual do Utilizador Página 4

Comentários a estes Manuais

Manuais e produtos relacionados com Multímetros Atten AT6011